DeWalt DCS332 Traduction De La Notice D'instructions Originale page 31

Charger
Mains voltage V
AC
Battery type
Approx. charging time of min 30 (1.3 Ah)
battery packs
70 (3.0 Ah) 100 (4.0 Ah) 120 (5.0 Ah)
Weight kg
Charger
Mains voltage V
AC
Battery type
Approx. charging time of min 22 (1.3 Ah)
battery packs
45 (3.0 Ah)
Weight kg
Charger
Mains voltage V
AC
Battery type
Approx. charging time of min 22 (1.3 Ah)
battery packs
45 (3.0 Ah)
Weight kg
Charger
Mains voltage V
AC
Battery type
Approx. charging time of min 22 (1.3 Ah)
battery packs
45 (3.0 Ah)
Weight kg
The DCB107, DCB112, DCB113, DCB115 and DCB132 chargers
accept 10.8V, 14.4V, 18V Li-Ion XR and XR FLEXVOLT
packs (DCB123, DCB127, DCB141, DCB142, DCB143, DCB144,
DCB145, DCB181, DCB182, DCB183, DCB183B, DCB184,
DCB184B, DCB185 and DCB546) battery packs.
The DCB118 charger accepts 18V Li-Ion XR and XR FLEXVOLT
battery packs (DCB181, DCB182, DCB183, DCB183B, DCB184,
DCB184B, DCB185 and DCB546).
Fuses:
Europe 230V tools
U.K. & Ireland 230V tools
DCB113
230
10.8/14.4/18 Li-Ion
35 (1.5 Ah) 50 (2.0 Ah)
0.4
DCB115
230
10.8/14.4/18 Li-Ion
22 (1.5 Ah) 30 (2.0 Ah)
60 (4.0 Ah) 75 (5.0 Ah)
0.5
DCB118
230
18/54 Li-Ion
22 (1.5 Ah) 30 (2.0 Ah)
60 (4.0 Ah) 75 (5.0 Ah)
60 (6.0 Ah)
0,66
DCB132
230
18/54 Li-Ion
22 (1.5 Ah) 30 (2.0 Ah)
60 (4.0 Ah) 75 (5.0 Ah)
90 (6.0 Ah)
0,66
TM battery
TM
10 Amperes. mains
3 Amperes. in plugs
EC-Declaration of Conformity
Machinery Directive
Cordless Jigsaw
DCS331, DCS332
D WALT declares that these products described under
e
Technical Data are in compliance with:
2006/42/EC, EN60745-1:2009+A11:2010, EN60745-2-11:2010.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact D
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
Markus Rompel
Director Engineering
D WALT, Richard-Klinger-Straße 11,
e
D-65510, Idstein, Germany
08.08.2016
WARNING: To reduce the risk of injury, read the
instruction manual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.

DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.

WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.

CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
property damage.

Denotes risk of electric shock.

Denotes risk of fire.
General Power Tool Safety Warnings

WARNING: Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE
EngLIsh
WALT at
e
WALT.
e
29