rav SJA1 Manuel D'instructions page 23

Operating Instructions
Handling and Operation
GB
5.2 Tensioning of the belt
Pull the belt through the divided shaft.

Fig. 10:
Pre-tension the belt slightely by hand.

Fig. 11:
Tension belt by pulling and pressing the

hand lever.
Fig. 12:
Fix the hand lever at the requested positi-

on of the belt
Fig. 10:
5.3 Release of the belt
Retract the upper safety catch and hold it

Turn hand lever by 180°

Draw the belt out of the divided shaft

1
Fig. 11:
• Ratches and belts have to be che-
cked upon damages prior to every
use and in case of defects to be
replaced immediately.
• Protect the belt by means of the
supplied safety hoses against sharp
edges.
• The fixed load must be checked
several times and in case of need
retensioned.
2
3
22