Operating Instructions
Safety/Accident prevention
GB
Fig. 1:
Fig. 2:
3.1
Lifting and Lowering of Loads
is only allowed, if it is guaranted that
• the centre of mass of the load lies inside
the base area of the lift and inside the area
of the gear plate (Fig. 3)
• the load lies safe on the gear plate
• the load is secured with both nylon belts
and
• no persons or obstacles are placed within
the motion area of the gear plate and its
loads
Fig. 3:
Fig. 4:
3.2
Moving of the Load
on the lift is only allowed if
• the load is lowered completely,
• the lift has a safe stand and
• there are no obstacles inside the motion
area.
20