Prim ELCROSS light Manuel D'instructions page 9

Elcross Light back support for pendulous abdomen model 2134 (Fig. 2):
• Make sure that the lateral straps (B) are placed on the lateral velcro (C).
• Take the lateral velcro (A) off the back support. Place the Elcross Light back
support to the adequate height and position, without making tension. In this
case, considering that this is a back support for pendulous abdomen, the back
support has to be placed with the velcro closure laterally (A), as the front part is
indicated to lodge the abdomen.
• Fit the back support correctly and close the lateral velcro (A).
• Take the lateral straps (B) off the lateral velcro (C) and pull them with the same
tension, from the rear to the front. Close the lateral straps (B) over the frontal
closure of velcro loop (A), make sure that they stay under the abdomen.
Elcross Light dorsolumbar back support model 2137, 2137N (Fig. 3):
• Make sure that the lateral straps (B) are placed on the lateral velcro (C).
• Adjust the posterior straps (E) of the back over the shoulder and then pass them
under the axillas. Pull backwards and cross them by the back. Adjust them over
the velcro loop of the lateral straps (B) which must be placed over the lateral
velcro (C) of the back support.
• Take the frontal velcro (A) off the back support. Place the Elcross Light back
support to the adequate height and position, without making tension.
• Fit the back support correctly and close the frontal velcro (A).
• Take the lateral straps (B) off the lateral velcro (C) and pull them with the same
tension, from the rear to the front. Close the lateral straps (B) over the frontal
closure of velcro loop (A).
• Take the rear straps off the back (E) from the lateral straps (B) and pull them with
the same tension, from the rear to the front. Close the rear straps of the back (E)
over the the frontal closure of velcro loop (A).
Product maintenance - washing instructions:
Machine wash at 40°C. Do not bleach. Do not iron. Do not dry-clean. Do not tumble
dry. Dry on flat surface. Do not hang out.
Maintain the velcro free of dirt preventing them from threads, fluffs, etc. to keep
its characteristics. Close all the velcro straps on the brace surface before washing
the product.
Note: Any serious incident involving the product must be reported to the
manufacturer and to the competent authority of the Member State where the
user and/or patient is located.
IU.329.4_fajas_elcross_light.indd 9 IU.329.4_fajas_elcross_light.indd 9 30/11/2022 13:37:42 30/11/2022 13:37:42