Publicité
Les langues disponibles
Les langues disponibles
SPECIFICATIONS
― ―
Water Tank Capacity:
3800ml
Voltage:
100-240V~
Power:
23W
300ml p/h at full power
Mist output:
FEATURES
― ―
1.
Mist Lid
2.
Water tank
Humidifier base
3.
4.
LED light
5.
Control dial
6.
Power indicator light
LED on/off button
7.
8.
Aroma tray & cotton pad
Water tank cap with filter
9.
INSTALLING FILTER, FILLING WATER TANK AND SWITCHING ON
― ―
1.
Lift the water tank off using the handle beneath the mist lid.
2.
Turn the water tank upside down and unscrew the water tank cap. The cap forms part of the
water filter which helps to eliminate contaminants in the water.
Screw the filter onto the water tank cap as in the illustration below.
3.
4.
Fill the water tank with cold water.
Screw the water tank cap (now with the filter affixed) back into the water tank.
5.
6.
Place the water tank back into the base. Be sure to align the base correctly so it secures into
place.
7.
Place the mist lid on top of the water tank and plug the power cord into an electrical outlet.
Turn the humidifier on by turning the dial clockwise. The power indicator light will turn on.
8.
9.
Within a few seconds, the mist will start coming through the mist lid. Use the control dial to
control the intensity of the mist.
10.
Turn the LED light on by pressing the LED button.
6 of 52 | English
Size:
23.5 x 22 x 34.5cm
50/60Hz
Frequency:
Ideal Room Coverage: 25-35m²
Note: When the humidifier runs out of water the power indicator light will turn red and the mist
will stop.
Do not move the humidifier once you have installed the water tank onto the base as this could
cause water to leak.
Ensure your humidifier is always used on a flat surface to prevent the water leaking.
REPLACING THE FILTER
― ―
The ceramic ball filter is designed to remove impurities from the water and ensure it stays clean
for as long as possible. We recommend replacing your filter at least once every 6 months or 500
hours of use. The filter forms part of the water tank cap so to replace it, simply unscrew it from
the water tank and install the replacement.
Note: DO NOT throw away the cap on the filter when replacing the filter. Please remove this from
the old filter and use it with the new filter.
To purchase additional filters, visit www.probreeze.com/products/humidifiers/replacement-
ceramic-filters-humidifier/. If you have any questions or struggle to find the specific filter you
need, please contact our customer care team for friendly and efficient help by emailing
help@probreeze.com.
Scan to purchase replacement filters.
English | 7 of 52
Publicité
