Publicité
Les langues disponibles
Les langues disponibles
QUICK START GUIDE
When you just can't weight
Put your empty container on the weigh pan and press
➀
the dial to turn on Tally Pro.
Press the mode button to toggle between the three
➁
modes, selecting Brew Assist. ™
Turn the dial to select your preferred brew ratio
➂
to automatically calculate the water weight.
➃
Add to the container until it reaches your desired weight.
RATIO RECOMMENDATIONS
Coffee dosage guide
20 grams: Pour-over for one
40 grams: Pour-overs for two
60 grams: French press for three
6
Coffee-to-water
1:2.5 → Fellow Prismo
AeroPress
Attachment
®
1:8 → Cold brew
1:14 → French press
1:15 → AeroPress
®
1:16 → Pour-over
1:17 → Coffee maker
BREWING IN BREW ASSIST
Get the coffee-to-water ratio right every time.
After following steps 1-4 in Quick Start with Brew Assist,
➀
press the timer button to move to the next step.
Check out the display. Your saved target water weight
➁
in grams is on the right. The current water weight in grams
is in the center (it starts at zero until you pour). The timer
is on the left (it starts at zero, too).
Start pouring and Tally will start timing! Pour until the center
➂
(current) and right (target) weights are the same. The center
oval will change from black to white to let you know your
perfect brew is ready.
Tips
• If you prefer a countdown, you can press the timer button before
pouring. You can pause the timer any time by pressing it again
while timing.
• Press the dial at any time to tare the scale. This will not erase your
water target if already set.
• To start another brew, press and hold the timer button until the
scale resets.
• Scan here for a video walk-through of how to use
Brew Assist. ™
MODE
™
7
Publicité
