Power Unit Menu System; First Start-Up; Menu System - Husqvarna PP220 Manuel D'utilisation

Power unit menu system

General
Display texts are illustrated in English in the manual, but will appear in the chosen language on the product display.
For more information on FreeRTOS, please see www.freertos.org
When K6500 or DM650 are connected to the power pack PP220, the display on the power pack unit is used.
When K6500 is running the display will turn off on the power pack.
When WS220 is connected to the power pack PP220, the display on the remote control is used. The display on the power
pack will then be extinguished.
Use the arrow keys (2) to scroll in the menus and the "OK" button (1) to confirm the selection. Use the "back" button (3)
to go back in the menus.
OK
1
3
2

First start-up

SET TIME
1 2 : 5 9 PM
3 SET TIME WITH
STEP FORWARD WITH OK
At the first start-up of the power pack the following settings must be made:
• LANGUAGE (1) Select the required display language.
• TIME FORMAT (2) Select the required time format.
• SET TIME (3) State the current time.
• DATE FORMAT (4) Select the required date format.
• SET DATE (5) State the current date.
When these settings have been made the main display is shown with information about the connected tool (6). Please
observe, the illustration shows an example.
12 – English

MENU SYSTEM

1
LANGUAGE
DEUTSCH
ENGLISH
FRANÇAIS
SVENSKA
21 JUN 12:45 DATE FORMAT
YYYY-MM-DD
OK
YYYY/DD/MM
DD.MM.YYYY
K6500
READY
21 JUN 12:45 TIME FORMAT
12h
OK
SET FORMAT WITH
STEP FORWARD WITH OK
21 JUN 12:45 SET DATE
4
2010-04-22
OK
SET DATE WITH
STEP FORWARD WITH OK
21 JUN 12:45
6
MENY
OK
21 JUN 12:45
2
OK
21 JUN 12:45
5
OK