Costway NP11323 Instructions D'assemblage page 6

Assembly Instructions
2. Attach the front and back
Legs (C,D) to the Studs on
the Chair Seat (B) using
Washers and Nuts (L,M,N).
Tighten the Nuts using the
wrench. Add the nut caps (P).
10
1. Place all parts
on a clean soft
surface.
3. Attach the Backrest (A)
to the Chair Seat (B) using
Washers and Nuts (L,M,N).
Tighten the Nuts using the
wrench. Add the nut caps
(P).
4. Attach the Right and Left
Arm(E,F) using the studs (G)
and washer, nuts (H,I,J) , DO
NOT over tighten, and then
using Studs (K) and Washers
and Nuts (H,I,J). Adjust to a
correct place , then tighten
G&K. Add the nut caps (O).
3. Care & Maintenance
1.This product is NOT a TOY. Keep your children at bay in the
process of assembly.
2.Do not put hot items directly on furniture surface.
3.Do not clean furniture with HARSH cleansers or polish.
4.To prolong the product lifetime, avoid extended and lengthy
exposure to rain and sunshine.
5.Where possible, place under covers and or patio and or
awnings.
6.Stains may be removed with mild soap solution and damp
cloth.
7.Dust and pick-up spills using a clean, non-colored, lint-free
cloth.
5.Adjust the pre-installed
Rubber Pad until the chair is
level with the ground.
Upon completion of full
assembly and bolted up-all
screws can be tightened
down.
11