Publicité
Les langues disponibles
Les langues disponibles
5
Select the year
Press the PLAY/K or STOP/L but-
ton until your desired year appears.
(Example: 2004)
Then, press the F.FWD/B button.
6
Select the hour
Press the PLAY/K or STOP/L but-
ton until your desired hour appears.
(Example: 5, PM)
Then, press the F.FWD/B button.
7
Select the minute
Press the PLAY/K or STOP/L but-
ton until the desired minute
appears. (Example: 40)
8
Start the clock
Press the MENU button on the
remote control.
Although seconds are not displayed,
they begin counting from 00 when
you press the MENU button on the
remote control. Use this feature to
synchronize the clock with the correct time.
NOTE:
When unplugging the AC cord or if there is a power
failure for more than 3 seconds, you may have to
reset the clock.
TO CHANGE CLOCK SETTING
If you want to change the clock,
1)Follow steps [1] and [2].
2)Select where you want to change using the
F.FWD/B or REW/s button.
3)Enter correct numbers using the PLAY/K or
STOP/L button.
4)Press the MENU button on the remote control to
start the clock.
PLEASE NOTE:
If there is no local PBS station in your area or on
your cable system, select "AUTO CLOCK" and
press the F.FWD/B or REW/s button to turn [OFF]
this function. Then you can manually adjust the
clock.
AUTOMATIC CLOCK SETTING
Make sure ...
– MANUAL CLOCK SET –
•
The TV/VCR is turned on.
MONTH DAY
YEAR
0 5 / 0 6
THU
2 0 0 4
•
Confirm the TV/VCR is receiving a RF (Radio
Frequency) signal from either an antenna or cable
HOUR
MINUTE
– – : – –
– –
system connection using the ANT. terminal on the
rear of the TV/VCR.
NOTE:
– MANUAL CLOCK SET –
•
If a cable converter box is being used, make sure it
MONTH DAY
YEAR
is powered on.
0 5 / 0 6
THU
2 0 0 4
•
You must use the TV/VCR remote control to per-
HOUR
MINUTE
form the clock setting procedure.
0 5 : – –
PM
•
If the TV/VCR is connected directly to a cable
converter box or satellite box, the local PBS station
– MANUAL CLOCK SET –
must be selected on the cable box itself, and the
TV/VCR must be set to the output channel of the
MONTH DAY
YEAR
0 5 / 0 6
THU
2 0 0 4
cable converter box or satellite box (usually chan-
HOUR
MINUTE
nel 3 or 4), to be able to set up or correct the clock
0 5 : 4 0
PM
automatically.
1
Select "SETTING CLOCK"
Press the MENU button on the
5:40 PM
remote control.
Press the PLAY/K or STOP/L but-
ton to select "SETTING CLOCK".
Press the F.FWD/B button to enter
"SETTING CLOCK" menu.
2
Set "AUTO CLOCK" to [ON]
Press the F.FWD/B button until
"AUTO CLOCK [ON]" appears.
- 13 -
– M E N U –
TIMER PROGRAMMING
PICTURE CONTROL
B SETTING CLOCK
CHANNEL SET UP
USER'S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
– SETTING CLOCK –
B AUTO CLOCK
[ON]
AUTO CLOCK CH SEARCH
AUTO CLOCK CH
[ 02 ]
MANUAL CLOCK SET
D.S.T.
[OFF]
EN
9I03
Publicité
