Publicité
Les langues disponibles
Les langues disponibles
EN
3
A
2.
Push the speed switch (3) to the desired
operating speed. Push the speed switch to
position A for low speed or position B for high
speed.
B
12.2
STOP THE MACHINE
1.
Release the trigger to stop the machine.
12.3
ADJUST THE LENGTH OF THE CUTTING
LINE
While you operate the machine, the cutting line gets
worn and shorter. You can adjust the length of the
cutting line.
1.
Hit the trimmer head against the ground while you
operate the machine.
2.
Line is automatically released and the cut-off
blade cuts the excess length.
English
1
2
12.4
ADJUST THE CUTTING DIAMETER
The machine is set at a 17" (43.18cm) cutting
diameter. You can adjust to a 15" (38.10cm) cutting
diameter.
Set the cutting diameter to 15" (38.10 cm) for greater
runtime and 17" (43.18 cm)for a larger cutting area.
1.
Remove the battery pack.
2.
Remove the blade screws from the cut-off blade.
3.
Turn the cut-off blade 180°.
4.
Tighten the blade screws.
12.5
OPERATION TIPS
Keep clearance between the body and the machine.
Do not operate the machine without guard in place.
12
NOTE
WARNING
WARNING
Publicité
