Publicité
Les langues disponibles
Les langues disponibles
EN
Safety symbols marked on the instrument
G
Refer to user instructions
F
Caution: risk of electric shock
Equipment protected throughout by
t
Double Insulation
Enclosure is dust proof and protected
IP54
against water splashes
Line Power / mains
600 V AC rms maximum between
terminals, and between terminals and
600 V ~ max
earth
Connect to earth for voltage
g
measurement reference
Installation category definitions:
Only Megger supplied test leads designed for this instrument provide the full safety rating.
CAT IV - Measurement category IV:
Equipment connected between the origin of the low-voltage mains supply and the distribution panel.
CAT III - Measurement category III:
Equipment connected between the distribution panel and the electrical outlets.
CAT II - Measurement category II:
Equipment connected between the electrical outlets and the user's equipment.
Measurement equipment may be safely connected to circuits at the marked rating or lower.
This instrument is manufactured in the EU. The company reserves the right to change the specification or
design without prior notice. Megger is a registered trademark.
For local contact and support information see
Product Contents:
DLRO100 Series unit
„
Quick Start Guide, Safety Warnings and
„
Certificate of Test
www.megger.com
Equipment complies with current EU
c
directives.
Equipment complies with current UKCA
legislation
N13117 Equipment complies with
current "C tick" requirements
Do not dispose of by landfill, sewage
systems or by fire.
Universal Serial Bus (USB)
Bluetooth
www.megger.com
Calibration Certificate
„
Mains lead
„
USB Cable (XB, HB variants only)
„
DLRO100EB, DLRO100XB & DLRO100HB 100 A High Performance
Safety warnings
®
support@megger.com
or email
3
Publicité
