Publicité
Unlinking the
Scanner
If the base has a scanner linked to it, that scanner must be
unlinked before a new scanner can be linked. Once the previous
scanner is unlinked, it will no longer communicate with the
base. Scan the Unlink Scanner bar code to unlink a
scanner.
Unlink Scanner
Trigge
r
The following bar codes will allow you to use the scanner in
Manual Trigger - Normal Mode (need to press the
trigger to read) or Presentation mode (the scanner is
activated when it "sees" a bar code).
Note:
Presentation Mode continuously draws power, so use of
the external power supply is recommended for this mode.
Manual Trigger - Normal
(Default)
Presentation Mode
11
Publicité
