Manuels Connexes pour Honeywell Xenon XP 1952g
Sommaire des Matières pour Honeywell Xenon XP 1952g
- Page 1 Xenon™ XP 1952g/1952g-BF CCB01-010BT/CCB01-010BT-BF CCB-H-010BT/CCB-H-010BT-BF Cordless Area-Imaging Scanner and Charge Bases Quick Start Guide 1952-52BF-EN-QS-01 Rev (a)
- Page 2 Agency Model: 1952/1952-BF/ CCB-H-010BT/ CCB-H-010BT-BF Note: Refer to your User Guide for information about cleaning your device. Getting Started Turn off computer’s power before connecting the scanner, then power up the computer once the scanner is fully connected. When the base is connected and powered up, put the scanner in the base to establish a link.
- Page 3 Connecting the Scanner USB: Note: If you are charging the scanner using the USB cable, the current available for charging is reduced and charge times are increased. Charging via the power supply is faster. CCB01-010BT or CCB01-010BT-BF Base: CCB-H-010BT or CCB-H-010BT-BF Base:...
- Page 4 Keyboard Wedge: CCB01-010BT or CCB01-010BT-BF Base: CCB-H-010BT or CCB-H-010BT-BF Base:...
- Page 5 RS232 Serial Port: CCB01-010BT or CCB01-010BT-BF Base: CCB-H-010BT or CCB-H-010BT-BF Base:...
- Page 6 RS485: CCB01-010BT or CCB01-010BT-BF Base: CCB-H-010BT or CCB-H-010BT-BF Base:...
- Page 7 Reading Techniques The view finder projects an aiming beam that should be centered over the bar code, but it can be positioned in any direction for a good read. Note: If the scanner beeps 3 times when scanning a bar code, the link has not been established.
- Page 8 USB Serial If you are using a Microsoft® Windows® PC, you must download a driver from the Honeywell website. The driver will use the next available COM Port number. Scan the following code to program the scanner to emulate a regular RS232-based COM Port.
- Page 9 USB PC Keyboard Scan the following code to program the scanner for a USB PC Keyboard. USB PC Keyboard Keyboard Country Scan the appropriate country code below to program the key- board layout for your country or language. By default, national character replacements are used for the following characters: #$@[\]^‘{|}~ Refer to the ISO 646 Character Replacements chart in your User Guide to view the character replacements for each...
- Page 10 France Germany/Austria Great Britain Italy Norway Spain Switzerland Note: For a complete list of country codes, see the User Guide for your product.
- Page 11 Locked Link If you link a scanner to a base using the Locked Link Mode, other scanners are blocked from being linked if they are inad- vertently placed into the base. If you do place a different scan- ner into the base, it will charge the scanner, but the scanner will not be linked.
- Page 12 Unlinking the Scanner If the base has a scanner linked to it, that scanner must be unlinked before a new scanner can be linked. Once the previous scanner is unlinked, it will no longer communicate with the base. Scan the Unlink Scanner bar code to unlink a scanner.
- Page 13 Streaming Presentation™ When in Streaming Presentation mode, the scanner leaves the scan illumination on all the time and continuously searches for bar codes. Streaming Presentation Mode Suffi If you want a carriage return after the bar code, scan the Add CR Suffix bar code.
- Page 14 Add Code ID Prefix to all Symbologies Scan the following bar code if you wish to add a Code ID prefix to all symbologies at once. Add Code ID Prefix To All Symbologies (Temporary) Note: For a complete list of Code IDs, see the User’Guide for your product.
- Page 15 Charge Pack Status - Xenon XP 1952gBF only The following charge status feedback is provided by a Xenon XP 1952fBF scanner when the scanner is out of the base and has been idle for 5 seconds. Approxima Char Scanner LED Scanner Expected Beep Level...
- Page 16 Patents For patent information, see www.hsmpats.com. Disclaimer Honeywell International Inc. (“HII”) reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult HII to determine whether any such changes have been made.
- Page 17 Copyright 2019 Honeywell International Inc. All rights reserved.
- Page 18 If necessary, the user should consult the dealer or an experienced radio/television technician for additional suggestions. Honeywell International Inc.
- Page 19 Honeywell Productivity Solutions :ליצירת קשר באירופה 6545CG Nijmegen The Netherlands The Netherlands www.honeywellaidc.com The Netherlands Honeywell Productivity Solutions compliance Honeywell Productivity Solutions BV Lagelandseweg 70 :ﺎﺕ ﺍﻻﺗﺼﺎﻝ ﺍﻷﻭﺭﻭﺑ ﺔ Lagelandseweg 70 6545CG Nijmegen Lagelandseweg 70 Honeywell Productivity Solutions Hollanda 6545CG Nijmegen...