ProMed UC-50 Instructions D'utilisation page 15

O
PERATING THE UNIT
A. Before using the device, make sure that the voltage indicated on the device corresponds to the
local mains voltage. Insert the power plug (A) into the power socket.
B. Open the device by lifting the cover (B) upward.
C. Fill the cleaning tank (C) with water or approved cleaning liquid to the maximum filling level (H).
D. Place the object to be cleaned directly into the cleaning basket (I) or use one of the provided
holders (J - L) and close the cover (B).
E. Press the power switch button (E) to switch on the device.
F. Select the desired cleaning time (1:30, 3:00, 4:30, 6:00, 7:30 minutes) by pressing the timer
button (F). The times will be shown on the LCD display (D).
G. To start the cleaning process, press the start button (G). The selected cleaning time will now
be counted backwards and the device will stop automatically when the time runs out.
H. Now you can open the cover (B) again and take out the cleaned object.
In the event of malfunction:
• Check if the power supply is good.
• Check if there is a liquid in the cleaning tank (C).
• Check if there is the liquid in the cleaning tank (C) does not exceed the maximum filling
level (H).
• If this does not solve the problems, please immediately contact your service center.
Kaitstud / Secured by https://mereneid.eu/
DE
EN
FR
IT
ES
NL
RU
PL
SE
FI