Publicité
Les langues disponibles
Les langues disponibles
Note:
1. Because many factors ( degree of oxidation of metallic object, metal impurities
in soil, soil moisture content, etc. ) can affect metal detection/identification in
DISCRIMINATION mode, the results of metal identification/discrimination are not
guaranteed to be correct.
2. During detection, the search coil must be in motion. If the search coil is still, the
detector can not detect metal normally.
3. The detector can work with the earphone ( optional ). To use the earphone, just
insert the plug of the earphone into the earphone jack on the control box, the
loudspeaker in the control box will be disabled automatically.
Note:
For safety, do not use earphones near traffic.
To avoid hearing loss, do not use earphones if using them makes you feel
uncomfortable.
BATTERY REPLACEMENT
When the low battery indicator "
" appears on display, the battery is not high
enough and must be replaced immediately.
To replace the battery, set the power switch to OFF position to turn off the detector
first. Then use a suitable screwdriver to unscrew the screw on the battery cover
( see Figures 1 and 2 ), and then remove the battery cover. According to the
polarity indication on the inner wall of the battery compartment, replace the old
battery with a new one of the same type, making sure that the polarity connections
are correct ( refer to Figure 14 ). Reinstall the battery cover and the screw.
- 14 -
Publicité
