Charging The Appliance - FRANCK PROVOST The Barb'XPERT FPH- 004 Manuel D'utilisation

CHARGING THE APPLIANCE

WARNING
For the purposes of recharging the battery, only use the detachable supply unit provided with this appliance (model : KH6-030060US).
- Charge the appliance fully before the first use and after a long period of disuse.
- While charging, the charging light is red.
- It takes 8 hours to charge the appliance fully and it then has a battery life of approx 45min.
- Plug the small plug into the charging base.
- Plug the adaptor into the mains.
- Place the appliance on the charging base.
- Once charging is completed, unplug the adaptor from the wall socket.
OPERATING INSTRUCTIONS
TO BEGIN
- Make sure that the appliance is switched off before removing or installing the head or before attaching the guide comb.
- To attach a head, adjust the bottom of the accessory on the appliance and interlock until you hear a click.
- To remove the head, hold the appliance's handle with one hand and remove the head with the other hand by pushing it upwards.
- If you are using the appliance for the fisrt time, please be careful: do not make any fast movements; uniform movements are recommended.
USING THE GUIDE COMB
- The cutting height indicated on the guide comb is given in mm and corresponds to the hair length after cutting.
- Tip : start by cutting using a high cutting height and gradually reduce the cutting height until you achieve the desired result. The guide comb
guarantees a uniform cutting height.
- IMPORTANT : always position the guide comb BEFORE turning the appliance on and always turn the appliance off before changing the
guide comb.
- Place the guide comb on the edges of the appliance's blades, then push on the back of the guide comb until you hear a click. To remove,
detach the back of the guide comb, then remove it.
TO THIN OUT AND TAPER YOUR BEARD/MOUSTACHE
- Attach the adjustable guide comb to the trimmer's blade and select the desired length by sliding the guide comb upwards or downwards.
- Once you have set the adjustable guide comb to the desired length, switch the trimmer on.
- Place the guide comb's flat top against the skin.
- Complete movements towards the edge of your beard/moustahe to size it according to your preferences in the different areas of your face
and movements towards the outside of your beard at neck level.
TRIMMING YOUR SIDEBURNS
Start with the edges of the sideburns and, with the blades of the trimmer pushed gently against your skin, move the appliance towards the outer
edges of the sideburns to size them according to your preferences.
TO TRIM YOUR NECK
Note: you will need a mirror to do this if your are alone.
- Remove the adjustable guide comb from the appliance. Use your fingers to remove the hair from the neck. Your index finger should cover the
roots of the hair you want to remove to prevent any accidental cutting with the trimmer.
- With your other hand, hold the trimmer at the base of your neck with the blades facing upwards and move the trimmer up
along the length of your neck until it comes into contact with your finger covering the roots of the hair at the base of your head.
Make sure that you move the appliance slowly when doing this and hold the roots of the hair at the base of your head away from the trimmer.
TIPS FOR ACHIEVING THE BEST RESULTS
Beard, moustache and sideburn hair must be dry. Avoid applying lotion using the trimmer.
USER-MAINTENANCE INSTRUCTIONS
- Regular maintenance of the blades will keep the appliance in an optimum conditions.
- Make sure that the appliance is switched off and unplugged.
- Remove the guide comb and clean it using the cleaning brish provided.
- Brush the blades carefully using the cleaning brush to remove any hair.
- Turn your appliance on and carefully add a few drops of lubricating oil to the blades. Wait for a few seconds, then turn the appliance off and
remove any excess oil using a dry cloth.
Only use the oil supplied in the kit: this has speen specially formulated for the appliance.
HOW TO REMOVE THE BATTERY
Note : we advise that you have the rechargeable battery removed by a professional.
Only remove the rechargeable battery when you are intending to discard the appliance.
Unplug the appliance from the mains. Make sure that the battery is fully discharged when you remove it.
1. Check if there are screws in the front or back of the appliance. If there are, remove it.
2. Remove the appliance's front and/or rear panel using a screwdriver.
3. If necessary, remove the screws and/or additional parts until you can see the printed circuit board with the rechargeable battery. If neces-
sary, cut the wires to separate the printed circuit board and the rechargable battery from the appliance.
- The battery must be removed from the appliance before it is scrapped.
- The appliance must be disconnected from the supply mains when removing the battery.
- The battery is to be disposed of safely.
Model FPH - 004
Notice_0580.indd 3
GUARANTEE
This product is guaranteed by ABC DISTRIBUTION against any manufacturing or physical defect for the length
of the guarantee from the date of purchase. This product is provided with accessories which are not covered
by the warranty. If the product becomes faulty with respect to its original specifications during the guar-
antee period (2 years), a reparation or replacement product could be offered subject to the faulty prod-
uct and proof of purchase, which must mention the date of purchase, being sent to the following address :
ABC Distribution
3 avenue des Violettes
ZAC des Petits Carreaux
94386 – Bonneuil-sur-Marne Cedex
France
3
21/05/2019 10:52