Proper Use - Pattfield Ergo Tools E-STP 8517 Mode D'emploi D'origine

Anleitung_E-STP_8517_SPK7__ 02.07.13 11:43 Seite 8
GB
1. Before start-up, note the following!
● The pump can be connected to any shock-proof
plug which has been installed according to
regulations. The plug must have a supply voltage
of 230 V ~ 50 Hz. Fuse min. 6 Amp.
Caution!
The pump must be powered via an earth-leakage
circuit breaker (RCD) with a rated fault current of
no more than 30 mA (according to VDE 0100 Part
702 and 738).
The equipment is not designed for use in
swimming pools and paddling pools of any kind
or other bodies of water in which people or
animals may be present during operation. It is
prohibited to operate the equipment if a person
or animal is in the danger area. Ask your
electrician!
This equipment can be used by
children of 8 years and older and by
people with limited physical,
sensory or mental capacities or
those with no experience and
knowledge if they are supervised or
have received instruction in how to
use the equipment safely and
understand the dangers which
result from such use. Children are
not allowed to play with the
equipment. Unless supervised,
children are not allowed to clean
the equipment and carry out user-
level maintenance work.
Attention!
(Important for your own security)
Before starting to run your new submersible pump,
please have the following items checked by an
expert:
● Ground connection
● Zero conductor
● Fault current breaker switch must correspond
the the safety regulations of the power plants
8
and they must work faultessly.
● The electrical connections must be protected from
moisture.
● If there is danger of looding, the electrical
connections must be taken to higher ground.
● Circulation of aggressiv fluids, as well as the
circulation of abrasive materials must be avoided
at all costs.
● The submersible motor-driven pump must be
protected from frost.
● The pump must be protected from running dry.
● Access on the part of children should also be
prevented with appropriate measures.
2. Layout (Fig. 1)
1 Handle
2 Mains lead
3 Universal hose connection
4 Intake cage
5 Floating switch

3. Proper use

Your submersible pump is designated for the
circulation of water with a maximum temperature of
35° C.
This pump may not be used for other fluids,
especially motor fuels, cleaning fluids, and other
chemical products!
The machine is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the
manufacturer will be liable for any damage or injuries
of any kind caused as a result of this.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
4. Installation
The submersible motor pumps is installed as follows:
● In a stationary position with fixed pipeline
or
● in a stationary position with a flexible hose pipe.