OPERATING INSTRUCTIONS
Dear customer,
These operating instructions are for practical use and should be available to the user where the suction
hood is to be used. Please keep these operating instructions close to the unit. An assured, faultless func-
tioning of the suction hood is only ensured when these instructions are followed.
Do take note of the safety information.
Many thanks.
Your asecos team
1. Development and manufacture
asecos GmbH Sicherheit und Umweltschutz, D-63584 Gründau
2. Serial number
The serial number can be taken from the type plate on the front side of the suction hood.
3. Intended purpose
Complete capture of hazardous vapours, gases or suspended solids at the place where they emerge or where they are
created before they can have effects that are damaging to health or to the environment (see hazardous materials regula-
tions, workplace regulations and laboratory guidelines). Proof by means of ventilation test according to EN 14175-3 (5.4.4)
4. General safety notes / guarantee
•
Take notice of the legislation and provisions to be applied in dealing with hazardous materials.
•
Use the suction unit only if it is in good condition.
•
Users must be instructed how to use the suction unit.
•
Before using aggressive substances, please check the resistance of the surface of the suction unit to these substances.
•
Any hazardous materials that escape must immediately be collected and removed.
•
Take note of all information in these operating instructions.
•
Please follow the instructions of the safety specialists, technical monitoring services (BG, GAA), construction super-
vision etc.
•
Please observe accident prevention and workplace regulations.
•
The required exhaust air flow is to be provided on site.
•
The guarantee for this product is agreed between you (the customer) and your dealer (the seller). Independ-
ently of this, the manufacturer provides a guarantee for the products listed in the operating instructions for
24 months after the date of sale. All model safety equipment are subject to a compulsory annual inspection
by specialised staff authorised by the manufacturer. If this inspection is not carried out annually, or not car-
ried out by specialised staff authorised by the manufacturer, the customer's guarantee claims against the ma-
nufacturer will be invalidated.
5. Design
•
Anodised aluminium tubular frame design with painted aluminium corner connectors
•
The sides, ceiling, front and rear wall are made of transparent 5 mm-thick acrylic glass.
6. Function
Due to extraction at the ceiling, the suction unit is a highly effective way of ensuring that no vapours, gases or suspen-
ded solids involved in handling hazardous work materials (for instance when filling containers, gluing, cleaning, prepa-
ring, weighing etc.) pollute the breathable air. These are collected by the effective suction and removed by the exhaust
system.
4