Publicité
Les langues disponibles
Les langues disponibles
Start-up
If you are already using Homematic IP devices in your smart home
system or if you want to combine your Homematic IP Wired devices
with wireless Homematic IP components, you can also connect the
Homematic IP Wired devices to an (installed) access point. There-
fore, connect the Homematic IP Wired Access Point to the (previ-
ously installed) Homematic IP Access Point, as described in the user
manual. Then proceed as described above to connect the glass dis-
play.
5.4
Installing updates
The Homematic IP app or CCU3 informs you when a firmware up-
date is available for the glass display. The update consists of two
units. The firmware update in the Homematic IP app or the CCU3
WebUI and the firmware update on memory card via the microSDHC
card slot (E).
Use only the files specified for the device and check the version
numbers in the Homematic IP app or CCU3.
The microSDHC card can be removed again after the update.
Update process:
•
An update for the glass display is indicated in the Homematic IP app
or CCU3.
•
Use a standard microSDHC card (not included in the package
contents) and format it with the FAT32 file format. The maxi-
mum storage capacity of the microSDHC card should not exceed
32 GB.
•
After downloading the file from the Downloads section of the
Homematic IP website (under the "Firmware, software and scripts"
category), copy the two files (assets.enc and app.enc) directly to
the microSDHC card (the files must not be in a sub-folder).
•
Insert the memory card into the microSDHC card slot (E) and
insert the display into the mounting plate (A).
•
The update is carried out automatically.
36
6
Operation
Once your glass display has been connected successfully, it can be easily
set up via the WebUI user interface or the Homematic IP app.
Thanks to the proximity sensor, the display is automatically illuminated as
soon as a person approaches. The display can be operated intuitively by
touch. Six languages (German, English, French, Spanish, Italian or Dutch)
can be selected for operation.
The glass display has three screen pages that you can switch between
using the arrow keys on the right and left sides of the screen.
Each page can be individually divided into one, two or four tiles for oper-
ating the desired functions, enabling a wide range of functions from the
areas of light and shading to be available.
7
Error codes and flashing sequences
Flashing code
Meaning
Short orange flashing Data transfer
1x long green flash
Operation
confirmed
1x long red flash
Operation failed Please try again.
Short orange flashing
Pairing mode
active
(every 10 seconds)
6x long red flashes
Device defec-
tive
1x orange and 1x
Test display
green lighting
(after establishing
power supply)
Operation
Solution
Wait until the transmission is
completed.
You can continue operation.
Please enter the last four
numbers of the device serial
number for confirmation (see
„5.3 Anlernen" auf Seite 33).
Please see your app for error
message or contact your
retailer.
After the test display has
stopped, you can continue.
37
Publicité
