Tronic TPB 10000 A1 Instructions D'utilisation Et Consignes De Sécurité page 36

The power bank
button is pressed or when a device is connected,
even though the battery is charged.
The power consumption of the connected devices is too
high. Therefore, the internal overcurrent protection device
was activated.
Reduce the number of devices connected and press the
ON / OFF button
P Cleaning and care
This product has no internal parts requiring maintenance.
Moisture entering the product may result in damage.
Ensure no moisture enters the product during cleaning to
prevent damaging the product beyond repair.
Do not use abrasive, solvent-based or aggressive cleaners.
These can damage the surface of the product.
Only clean the product with a slightly damp cloth and mild
washing-up liquid.
P Storage during non-use
Store the product in a dry dust-free location, protected from
direct sunlight.
If the product is not used for a long time, the built-in
battery should be fully charged to prolong its operating
life. Regularly charge the built-in battery if you do not use
the product for a long period of time. This is necessary to
preserve the battery.
GB/IE 36
does not react when the
3
6 .