Publicité
Les langues disponibles
Les langues disponibles
the milk.
• Switch off the bottle warmer, holding the ON/OFF button (f) down for 3 seconds.
• Turn the bottle warmer upside down, disconnect it from the bottle, remove the adaptor
(unscrewing it anticlockwise) and assemble the bottle. Before feeding baby, check the
temperature of the milk by pouring a few drops on the back of your hand.
CHARGING THE BATTERY
• Charge the appliance with a USB-C adaptor or a certified power bank to avoid unstable
charging and possible accidents.
• Connect the USB-C cable (k) to a 5V = 2 / 3 A socket.
• The charge time for a completely flat battery is approximately 2 hours.
• While charging, the three bars of the battery charge indicator (h) will light up in
succession. Once the device is charged, the three bars of the indicator will remain on
to show that the battery is fully charged.
• Disconnect the appliance when the battery is fully charged. Prolonged charging can
lead to fires and accidents.
• To avoid possible damage, never allow the battery to become completely flat.
• It is possible to heat milk while charging the battery (with USB-C cable connected), but
do not do so when the battery is completely flat. We recommend charging when the
battery still has one bar on the charge indicator (h).
TROUBLESHOOTING
Problem
The battery will not charge.
After a few seconds, the
bottle warmer will switch off.
The display will show "E1".
Solution
Make sure that the USB-C power cord (k) or power socket
(i) are not damaged.
Make sure that the power and charge socket (i) is working
and delivering 5V = 2 / 3 A.
If the heating plate (c) is not in contact with a liquid
(dry), the appliance will switch off automatically to avoid
overheating.
Possible temperature sensor fault.
Inform your retailer or contact our after-sales Assistance
Service.
13
Publicité
