Publicité
Les langues disponibles
Les langues disponibles
charging and possible accidents.
• This appliance has a polymer rechargeable battery built in. Do not use it in environ-
ments with high levels of static electricity, magnetic fields. Not microwave safe.
• Disconnect the appliance when the battery is fully charged. Prolonged charging can
lead to fires and accidents.
IMPORTANT: always follow the instructions in this manual with care. The company
cannot accept any responsibility for accidents caused by improper use of the
appliance.
INSTRUCTIONS FOR USE
• Fill the bottle with milk or other liquid to be heated.
• Screw the suitable adaptor (if required) clockwise onto the bottle and then screw the
bottle warmer (also clockwise) onto the adaptor.
• CHOOSING THE ADAPTOR
- It is possible to choose the adaptor according to the make of bottle (see table in
Fig. 3) or the diameter of the bottle opening.
- Adaptors serve to connect the bottle warmer to major brand bottles. In case of
problems, see your retailer.
• Turn the bottle warmer upside down.
• To avoid LEAKS AND DRIPS:
- Make sure that the seal on the bottle warmer (b) and adaptor (j) are correctly
positioned.
- Tighten them further (clockwise) or refit them.
• Switch on the bottle warmer (d) by holding down the ON/OFF button (f) for 3 seconds.
The set starting temperature is 37 °C.
• To change the temperature, press the ON/OFF button (f) once for 40 °C, twice for 45 °C,
and three times for 50 °C.
• After selecting the required temperature, the display will blink three times to confirm
the temperature setting.
• To heat the milk evenly, turn the bottle upside down and mix the contents gently,
without removing the bottle from the warmer.
• A "beep" will sound when the temperature is reached. The temperature will be
maintained until the bottle warmer is switched off. We recommend never leaving the
bottle for more than half an hour as this could damage or deteriorate the nutrients in
12
Publicité
