DeLOCK 42605 Mode D'emploi page 3

English
Description
This enclosure by Delock is an external solution for different Slot-in Slim SATA
drives with 9.5 or 12.7 mm height, e.g. DVD-ROM, DVD±RW, Blu-ray etc. Thus
the built-in drive will be converted into a mobile drive. The enclosure is connected
to the computer or laptop via the USB Type-C™ plug.
Specification
• Connectors:
external: 1 x USB 5 Gbps USB Type-C™ male
internal: 1 x Slim SATA 13 pin receptacle
• For Slim SATA drives up to 12.7 mm height
• Supports DVD±RW, DVD-ROM, CD-RW, CD-ROM, Blu-ray
• Hot Swap, Plug & Play
• No external power supply needed
• Housing material: plastic
• Cable length: ca. 28 cm
• Dimensions (LxWxH): ca. 143 x 139 x 16 mm
System requirements
• Linux Kernel 2.6.38 or above
• Mac OS 10.9.5 or above
• Windows 7/7-64/8.1/8.1-64/10/10-64/11
• PC or laptop with a free USB Type-C™ port
Package content
• External enclosure, user manual
Safety instructions
• Protect the product against moisture
• Protect the product against direct sunlight
• Avoid anti-static electricity when installing the product
Installation Slim SATA drive (height 12.7 mm)
1. Mount your Slim SATA drive in the top case. Therefor you need to insert the
drive that it can slide into the SATA connector. This works best when you
insert the drive diagonally or pull the board with the SATA connector a bit out
of the case.
2. Now you can mount the bottom case. This part just needs to be put on the
top case and push it together till it snaps in.
-3-