Using The Video Out Socket; Connecting To Your Display; Controlling Video Playback - PURE SIROCCO 150 Manuel De L'utilisateur

Using the video out socket*

The iPod dock is able to output video from you iPod or iPhone to a suitable television or monitor,
using the PURE 3.5mm to Phono video out cable (available separately from your PURE dealer).
Please note that this is only the video signal; all audio will play through your Sirocco 150 speakers.
Before connecting your iPod dock to your display, please ensure that the 'TV-Out' settings on your
iPod or iPhone are correct (see the user guide for your iPod model for specific instructions).
*Video output is only available on iPod and iPhone models with video playback.

Connecting to your display

Insert the 3.5mm jack (black) of your 3.5mm to Phono video out cable into the video out socket on
the rear of the dock.
Connect the RCA jack (yellow) into the video socket of your display. This is usually coloured yellow,
and is usually located next to Left and Right audio sockets (red and white) as part of a composite
input. Tune your display to the correct input, for example, 'Composite' or 'AV'.
Video Out

Controlling video playback

You can use the remote control during video playback as you would during audio playback, or if
you wish, you can navigate using the controls on your iPod itself.
Dock adapter compatibility
Adapter
9
10
15
16
17
If your iPod model is not listed here, You may have received the correct adapter in the box with it.
If not, we recommend purchasing the correct one from Apple.
Rear view of dock, with iPhone inserted.
Model
iPod Classic
iPod Classic
iPhone 3G
iPod Touch 2nd gen
iPod Nano 4th gen
Typical composite input layout.
Video Audio R Audio L
Capacity
80 / 120 GB
160 GB
8 / 16 / 32 GB
8 / 16 / 32 GB
8 / 16 GB
EN
9