Pioneer BDR-XD08TB Guide De Démarrage Rapide page 17

Connection
This unit can be added without shutting down or rebooting the computer. Connect the unit to the
supplied USB cable.
1 Confirm that your computer (PC) has an available USB port.
2 With your Windows
connect this unit to the PC.
Caution
• Do not disconnect the USB cable during data transfers.
• Do not disconnect the USB cable during PC startup or any operation with the unit.
USB 3.0 port
Computer
recommended
(PC)
USB 3.0
USB cable (supplied)
Note
• Connection to a USB 3.0 port is recommended, since when a USB 3.0 cable is connected to a USB
2.0 port, the connection will be limited to USB 2.0 performance standards.
• This unit can operate with USB 1.1 but will not provide optimum performance.
• Connecting this unit through a USB hub or using unspecified cables may not achieve proper
operation.
Removal procedure
Check that the status shows that the main unit is not being accessed (the indicator LED is not lit
brightly), then remove the USB cable.
CAUTION
This product satisfies EMC regulations when the accessory's cables are used to connect the unit to
other equipment. To prevent electromagnetic interference with electrical appliances such as radios
and televisions, please use accessories when connecting.
®
or Mac operating system running, use the supplied USB cable to
This unit
DC IN
5V
BDR-XD08TB / BDR-XD08TS / BDR-XD08TG
USB Type-C
conversion
cable
(supplied)
DC IN
5V
USB cable
(supplied)
17
Nederla