BST Pro AP-707BT Manuel D'utilisation page 2

AP-707BT
Thank you for having chosen our ceiling speakers. For your own safety, please read this user manual carefully before installing the device.
SAFETY INTRODUCTION
 If the device has been exposed to temperature changes due to environmental changes, do not switch it on immediately. The arising
condensation could damage the device. Leave the device switched off until it has reached room temperature.
 Make sure that the available voltage is not higher than stated at the end of this manual.
 Make sure the power cord is never crimped or damaged. If it is damaged, ask your dealer or authorized agent to replace the power cord.
Please be aware that damages caused by manual modifications to the device are not subject to warranty.
GENERAL GUIDELINES
 Operate the device only after having familiarized yourself with its functions. Do not permit operation by person not qualified for operating the
device. Most damages are the result of unprofessional operation.
 Please use the original packaging if the device is to be transported.
 For safety reasons, please be aware that all modifications on the device are forbidden. Furthermore, any other operation may lead to short-
circuit, burns, electric shock, crash, etc. If this device will be operated in any way different to the one described in this manual, the product
may suffer damages and the guarantee becomes void.
DESCRIPTION
Includes 2 speakers (Active +passive)
2 way full range stereo sound
Built-in digital sound amplifier
Built-in Bluethooth wireless music streaming
Work with all of bluethooth device, BT V3.0
Line input with mini jack cable
Custom tooled design for high power & deep bass response
CONNECTIONS
TECHNICAL SPECFICATIONS
Frequency response：
Sensitivity (1w/1M):
Impedance:
Power (RMS):
Speaker:
Working range：
Power supply：
Dimension：
BST equipment is covered by a 2 years warranty on parts and labour
The following rules apply from the day the equipment leaves the factory:
The date on the invoice is considered to be the date the warranty begins.
Only companies approved by BST are allowed to work on the equipment. Warranty becomes void when other service technicians open the
equipment.
During warranty period, defective equipment must be sent by pre-paid mail in the original box.
BST will return the goods by pre-paid mail during the first year of warranty; thereafter the mailing cost is to be paid by the recipient
Potentiometers have a limited lifetime and are not covered by the manufacturer for more than normal use.
For all service enquiries, refer to your loc
© Copyright LOTRONIC 2015
80hz-20khz
90dB
8Ω
20W+20W , 30W Max
5.25" + 1" Dome tweeter
30+ feet
AC power supply 100-240V / 12VDC
∅214Xh88.9mm
ENGLISH
- Install the speakers in the ceiling.
- Connect the passive speaker to the active loudspeaker using the
supplied cables.
Connect the supplied AUX cable to the connector "AUX IN"
-
- (if you want to use this input)
Put to "ON" the Bluetooth button if you want to use the BT,
-
or to "OFF" if you don't want to use it.
- Connect the 12V power supply to the terminal block of the active
speaker, paying attention to the polarity.
- Connect the AC power adapter to the mains.
www.bstdj.com
Page 2