KERN FKB Serie Notice D'utilisation page 99

11.2 Using the application
11.2.1 Piece counting
Before the balance can count parts, it must know the average part weight (i.e. refer-
ence). Proceed by putting on a certain number of the parts to be counted. The bal-
ance determines the total weight and divides it by the number of parts, the so-called
reference quantity. Counting is then carried out on the basis of the calculated aver-
age piece weight.
• The higher the reference quantity the higher the counting exactness.
• Especially high reference must be selected for small parts or parts with con-
siderably different sizes.
• Smallest counting weight see table „Technical data".
1. Set reference
Reference quantity 5, 10, 20 or 50:

TFKB-B-BA-def-2412
 If necessary, put on and tare the weighing container.
 Put on the desired quantity of reference pieces.
 Invoke menu setting < ref > and confirm by ➔ button.
 Use the navigation keys  to select the reference piece
quantity (5, 10, 20, 50) according to the placed reference
and confirm with the ➔ button.
 The balance will calculate the average item weight and
then displays the quantity of pieces.
 Remove reference weight. The balance is now in piece
counting mode counting all units on the weighing plate.
37