Home Decorators Collection SHANDEL CF48SHA3BN Guide D'utilisation Et D'entretien page 8

Assembly (continued)
RECEIVER
WHITE
BLACK
BLUE
4
MOUNTING THE FAN ASSEMBLY
□
Place two screws and washers on the mounting bracket (A)
(marked "b" on diagram) which correspond with the slots in
the canopy (B). Screw in two turns.
□
Position the canopy (B) to the mounting bracket (A) by aligning
the slots to the screws (marked "b" on diagram) then turn to lock.
□
Position and tighten the two screws and washers (marked
"a" on diagram) then tighten the two screws (marked "b"
on diagram).
a
b
Washer
B
OUTLET
BOX
Filter
BLACK
BLACK
WHITE
WHITE
GREEN
GROUND
a
A
Washer
c.
□
Ensure the 3 connectors on supply wires are turned upward
and pushed carefully up into the outlet box.
□
Position the receiver into the mounting bracket (A) as shown.
Filter
SUPPLY
CIRCUIT
120V
5
b
8
A
(H)
MOUNTING BLADES TO THE
MOTOR
□
Insert the blade into the fan as shown.
□
Tighten the blade to the motor (B) with the screw, flat
washer and fibre washer removed in the previous step
as shown.
□
Slightly turn the blade (F) after installation and repeat the
same step for the other blades (F).
B
F
Fibre washer
Metal washer
Screw
Reciever
(G)
B