Home Decorators Collection SHANDEL CF48SHA3BN Guide D'utilisation Et D'entretien page 7

Assembly
1
PREPARING FOR MOUNTING
□
Release the mounting bracket (A) from the canopy (B) by
losening the four screws (marked "a" and "b" on diagram)
and washers.
A
b
Washer
a
3
ELECTRICAL HOOK-UP
□
This fan is equipped with a remote control unit for controlling
the fan speeds and light kit.
a
Setting the code on the hand-held remote and the receiver.
□
Remove the battery cover on the hand-held remote
(Press firmly below the arrow and slide the battery cover off).
□
Install a 9V battery (not included).
□
Set code switches to the desired position.
□
Set the code switches to the same positions on the receiver
as set on the remote.
2
□
Install the J-Hook (BB) through center of the outlet box and into the
a
wood joist.
Washer □
Secure the mounting bracket (A) and rubber gaskets (AA) to the
outlet box.
□
Hang the safety cable onto the J-hook (BB).
□
Hang the temporary hook (FF) on the mounting bracket (A).
b b
Hang the fan on the temporary hook (FF).
Wood Joist
Outlet
Box
A
b
Make the following wire connections to the receiver unit using the
wire nuts supplied.
□
Connect the male and female plug from the filter and the receiver.
□
Connect the GREEN fan wire and the Green Filter Wire to BARE (ground)
wire.
□
Connect the WHITE receiver unit wire (MOTOR N) to WHlTE fan wire.
□
Connect the BLACK receiver unit wire (MOTOR L) to BLACK fan wire.
□
Connect the BLUE receiver unit wire (FOR LIGHT) to BLUE light wire.
□
Connect the BLACK receiver unit wire to BLACK supply wire.
□
Connect the WHITE receiver unit wire to WHITE supply wire.
□
After making the wire connections, ensure the wires are spread
apart with the grounded conductor and the equipment-grounding
conductor on one side of the outlet box and the ungrounded conductor
on the other side of the outlet box.
In Quebec, the installation of this product must be carried out by a
qualified electrician.
7
INSTALLING THE MOUNTING
BRACKET
WARNING: To Reduce The Risk Of Fire, Electric Shock, Or
Personal Injury, Mount To UL/CSA Listed Outlet Box Marked
Acceptable for Fan Support And Use Mounting Screws
Provided With The Outlet Box.
BB
Ceiling
AA
Outlet box Screws
(not provided)
NOTE: Once ground wires are connected, carefully tuck all wires and
marrettes into the metal outlet box making sure that the wires are clear
of the hemisphere and downrod when positioned in mounting bracket.
Please contact 1-800-986-3460 for further assistance.
BB
A
FF
Safety
cable
B
HOMEDEPOT.CA