Fluke Reliability VIBXPERT 3 Démarrage page 14

VIBXPERT 3 Getting Started and Safety Information
Chapter 3: User interface concept
The home screen is shown when VIBXPERT 3 is switched on.
Tap related icon to do required task.
Icon
1 – Analysis
2 – Balancing
3 – Coast down / run up
4 – Speed measurement
5 – Help
6 – Settings
7 – File manager
8 – Machine templates
9 – Task templates
Note: Refer to the on-board help for details (tap 3 or
Measure concept
VIBXPERT 3 uses a single time waveform signal to calculate all necessary
results and include overall values and required spectrums. The time waveform
signal remains on the device and can be used with changed measure settings.
Function
Used to start the vibration analysis application
Used to start the balancing application
Used to start the run up or coast down test
Used to measure asset RPM. A laser trigger sensor or the
VIBXPERT 3 stroboscope can be used.
Opens the on-board help
Used to change /edit device, measure and results settings
Used to manage asset results files
Used to create asset hierarchy for similar machines
Used to apply meaasure tasks on specific assets
12
on any screen).