Publicité
Les langues disponibles
Les langues disponibles
OPERATING INSTRUCTIONS
DOOR REVERSAL INSTRUCTIONS
If the appliance is placed on its back or side for any
length of time during this process, it must be allowed
to remain upright for 6 hours before plugging in to
avoid damage to internal components.
1. Remove the two screws that secure the hinge
axis to the lower right hinge. Slide the door
outward from the bottom to remove it from the
upper right hinge.
2. Remove the upper right hinge from the chassis.
3. Remove the screw hole covers from the upper
left side of the chassis and install the upper left
hinge. Place the screw hole covers in the screw
holes on the upper right side of the chassis.
4. Install the lower left hinge. The lower right hinge
does not need to be removed.
5. Remove the hinge hole cover from the upper left
side of the door and place it in the hinge hole on
the upper right side of the door.
6. Install the door on the upper left hinge and then
slide the bottom of the door toward the unit to
line it up with the lower left hinge. Install the
hinge axis to secure the door to the lower left
hinge.
Note: Before tightening the screws to secure the
hinge axis, ensure that the top of the door is level
with the top of the chassis, that the actuator on the
bottom of the door is making contact with the switch
on the chassis and that the rubber gasket is making
a good seal with the chassis all the way around.
1. Lower right hinge
2. Axis screws
3. Hinge axis
4. Actuator
5. Upper right hinge
6. Hinge screws
7. Upper left hinge
8. Lower left hinge
1
7
8
4
7
2
3
4
5
5
6
6
7
2
8
3
Publicité
