Power Dynamics PDC150 Manuel D'instructions page 9

PASSWORD SETUP
PASSWORD MODE SETUP
Here the password function can be activated. IF the password function is not
"ON", the parental control settings can easily be changed.
Note: The default password is "8888"
PASSWORD
This menu is used if you wish to add your own personal code.
Note: This code will not reset, when the unit is reset. The default setting is "8888"
TROUBLESHOOTING
Problem
No power supply
No picture
No sound
The CD/DVD won't play
CD/DVD-player doesn't react to signal from
remote control
Picture has interference
Nothing happens when CD/DVD-player unit
buttons are pressed
Warning!
This device is equipped with a class 1 laser diode. To ensure a safe operation do not remove any covers or
attempt to access the inside of the product. There are no serviceable parts inside the device. Maintenance and
service operations are only to be carried out by authorized dealers.
All manuals and user guides at all-guidesbox.com
Possible solution
Check that the plug has been inserted properly into the socket.
Check the connection between DVD player and TV set.
Check that the TV set is working properly
Check the connection between DVD-player and any other connected
units
Check that the TV set and amplifier are working properly and adjusted
correctly.
Check that the CD/DVD has been inserted correctly.
Clean the CD/DVD.
Remove any objects blocking the signal between remote control and
CD/DVD-player.
Check that the remote control is aimed at the front panel sensor on the
CD/DVD-player.
Check the batteries in the remote control and replace as necessary.
Check the CD/DVD for dust and scratches.
Clean or replace the CD/DVD.
Turn off the device, wait for then seconds and turn it on again.
Possible power drop out or power cut.
Turn off the device, wait for ten seconds and turn it on again.
9