Publicité
Les langues disponibles
Les langues disponibles
CONTROL PANEL
· Start Button: The Start Button starts the 2-Piston Vacuum Pump, which
engages the air evacuation process.
· Cancel Button: This button is used to stop the vacuum cycle at any time.
· Seal Time + and - Buttons: The Seal Time Button adjusts the number of
seconds that the Sealing Bar will apply heat to create the bag's seal. The
optimal time for different brands of bags can be adjusted using the Plus (+) or
Minus (-) Buttons. See the "Bag Sealing" section in this booklet for further
information on sealing vacuum bags.
· Seal Window: The numeric LED Seal Window indicates the number of
seconds that the Sealing Bar will be activated to apply heat to the bag that
creates the seal. Once the Seal Bar is activated, the display will countdown
to "0". See the "Bag Sealing" section in this booklet for further information on
sealing vacuum bags.
· Vacuum Window: The numeric LED Vacuum Window indicates the level of
vacuum that the Vacuum Sealer has attained. The display will count up from
"0" to "9".
· Pulse Button: The pulse button is for sealing liquids or delicate items, letting
you control the vacuum process. When the bag is prepared, press the pulse
button as many times as necessary until you have eliminated the desired
amount of air. Press the manual seal button to seal the bag.
· Manual Bag Seal Button: This button will start the Seal Bar at any time in
Manual Mode. More information about the Manual Mode can be found in the
"Manual Mode" section of his booklet.
· Accessory Button: Press the Accessory Button when using vacuum
canisters (sold separately) to vacuum and seal items stored in a canister.
NOTE: The Vacuum Sealer is ONLY intended to be used with VACUUM BAGS. For
best results, only use the recommended vacuum bags with an embossed or mesh lining.
DO NOT USE HOUSEHOLD BAGS! Any other uses of the Vacuum Sealer, other than
the uses described in this booklet, could potentially damage the appliance and void the
warranty!
9
Publicité
