General Information; Validity Of The Operating Instructions; Extent Of Supply; Contact - oventrop Hydrocor WM Notice D'utilisation

General information

1. General information
The original operating instructions were drafted in
German.
The operating instructions in other languages have
been translated from German.
1.1 Validity of the operating
instructions
These operating instructions are valid for the fol-
lowing models of the Hydrocor WM potable water
storage cylinder:
Type
120
160
200
1.2

Extent of supply

Please check your delivery for any damage caused
during transit and for completeness.
Items included in the delivery:
• Hydrocor WM potable water storage cylinder
• Type plate (to be affixed to the potable water
storage cylinder)
• Oventrop logo (to be affixed to the potable water
storage cylinder)
• Connection scheme (to be affixed to the potable
water storage cylinder)
• ErP label (to be affixed to the potable water stor-
age cylinder)
• Operating instructions (to be handed over to the
end customer)
• ErP data sheet (to be handed over to the end
customer)
1.3

Contact

Contact address
OVENTROP GmbH & Co. KG
Paul-Oventrop-Straße 1
59939 Olsberg
GERMANY
www.oventrop.com
Technical services
Phone: +49 (0) 29 62 82-234
1.4

Declaration of conformity

Oventrop GmbH & Co. KG hereby declares that this
14
Item no.
1395010
1395011
1395012
product complies with the basic requirements and
other relevant provisions of the EU Directives con-
cerned.
1.5

Symbols used

Highlights important information and further
explanations.
f Action required
•
List
1. Fixed order. Steps 1 to X.
2.
Z Result of action
2.

Safety-related information

2.1

Correct use

Operating safety is only guaranteed if the product is
used correctly.
The Hydrocor WM potable water storage cylinder is
used to heat and store potable water.
Any other use of the product will be considered
incorrect use.
Claims of any kind against the manufacturer and/or
its authorised representatives due to damage caused
by incorrect use will not be accepted.
Observance of the operating instructions is part of
compliance with correct use.
2.2

Warnings

Each warning contains the following elements:
Warning symbol
SIGNAL WORD
Type and source of danger
Possible consequences if the danger occurs
or the warning is ignored.
f Ways to avoid the danger.
The signal words identify the severity of the danger
arising from a situation.
DANGER
Indicates an imminent danger with high risk.
The situation will lead to death or serious
injury if not avoided.
NOTICE
Indicates a situation that may lead to damage
to property if not avoided.
Hydrocor WM
139501080-V01.10.2020