Technical Specifications - Bosch+Sohn Bosotherm Medical Mode D'emploi

12. Technical Specifications

Type:
Measuring Range:
Accuracy:
Clinical
repeatability:
Display:
Memory:
Nite Glow:
Operating conditions:
Storage conditions:
Automatic
Switch-off:
Voltage/battery:
Service life of
batteries:
Applied part:
Protection against
water and wetness:
Dimensions:
Weight:
Standards:
Expected
lifetime of the
equipment:
The bosotherm medical conforms to the provisions of the EU
Guidelines 93/42/EEC for Class IIa medical devices.
Technical changes reserved.
32
Digital Infrared Thermometer
bosotherm medical
0 °C to 100.0 °C (32.0 °F to 199.9 °F)
Laboratory: : ±0.2 °C, 32.0 ~ 42.2 °C
(±0.4 °F, 89.6 ~ 108.0 °F)
±1°C, 0 ~ 31.9°C, 42.3 ~ 100.0 °C
(±2 °F, 32.0 ~ 89.5 °F, 108.1~ 212.0°F)
Child: 0,11° C,
Adult: 0,07° C
Liquid Cristal Display with indicating
unit 0.1 °C (0.1 °F)
Auto-Display the last measured temperature
a. The display will be lighted for 4 seconds
when the unit is turned ON.
b. The display will be lighted again for 5
seconds when the measurement has
been completed.
10°C to 40 °C (50.0 °F to 104 °F)
Relative humidity 15 to 95%
-25 °C to +55 °C (-13 °F to 131 °F)
Relative humidity 15 to 95%
Approx. 1 minute after last measurement
has been taken.
3 V x 1 CR2032
at least 1,000 measurements
Type BF ( )
Keep dry. (
IP 21 in accordance with IEC 60529
141mm (L) x 26 mm (W) x 20 mm (H)
45g (with battery), 40g (w/o battery)
EN 12470-5, ASTM E1965, IEC 60601-1,
IEC 60601-1-2 (EMC),
IEC 60601-1-11
10 years
)