How To Reload A New Probe Cover - Bosch+Sohn Bosotherm Medical Mode D'emploi

5. How to Reload a new Probe Cover

(Use only original boso Probe Covers (520-7-086)
(1) Place a probe cover onto
the storage case hole with
paper side upwards.
(3) Completely push the
probe into the probe
cover holder.
NOTE:
• In order to avoid cross-contamination, please reload a
new probe cover for each measurement.
• Please check if the probe cover is fitted firmly before
usage (please see the diagrams below); If the probe
cover is broken, discard the probe cover and reload a
new one immediately.
• Neglect of these instructions leads to a damaging of the
instrument and expiring of warranty.
24
(2) Take the unit and vertical-
ly penetrate the probe into the
center part of the probe
cover.
(4) After feeling a slight click,
take out the probe with cover
attached tightly.