RM GL 704 G Notice D'installation Et D'emploi page 3

DECLARATION OF A STANDARDS CONFORMITY
DECLARATION OF A STANDARDS CONFORMITY DECLARATION OF A STANDARDS CONFORMITY
The producer confi rms that the devices agree with 2016/426/EU, 2014/35/EU, 2014/30/EU standards, rule
The producer confi rms that the devices agree with 2016/426/EU, 2014/35/EU, 2014/30/EU standards, rule
nr. 22/1997 sb., 258/2000 sb, 38/2001 sb, 118/2016 sb., 117/2016 sb. and with relevant goverment orders.
nr. 22/1997 sb., 258/2000 sb, 38/2001 sb, 118/2016 sb., 117/2016 sb. and with relevant goverment orders.
Instalation must be done with respect to valid standards. Attention, the producer refuses any responsibility
Instalation must be done with respect to valid standards. Attention, the producer refuses any responsibility
in case of direct or indirect damages which are caused due to wrong instalation, incorrect intervention or
in case of direct or indirect damages which are caused due to wrong instalation, incorrect intervention or
modifi cation, insuffi cient maintenance, incorrect use and also possibly caused by other reasons presented by
modifi cation, insuffi cient maintenance, incorrect use and also possibly caused by other reasons presented by
items in sale conditions. This appliance is set only for skilled use and must be operated by qualifi ed persons
items in sale conditions. This appliance is set only for skilled use and must be operated by qualifi ed persons
only. Parts set and secured by the producer or accredited person must not be rebuilt by user.
only. Parts set and secured by the producer or accredited person must not be rebuilt by user.
TECHNICAL DATA
TECHNICAL DATA
TECHNICAL DATA
Label with technical data is placed on the back side of the device. Study the electrical diagram of connection
Label with technical data is placed on the back side of the device. Study the electrical diagram of connection
and all following information before instalation.
and all following information before instalation.
WATTAGE
MODEL
GL-704 G
GL-708 G
GL-740 G
GL-780 G
DIMENSION
W MM
7,5 400 x 730 x 313
15 800 x 730 x 313
7,5 400 x 730 x 900
15 800 x 730 x 900
3