Publicité
1
Assemble the 3 cleaning lips to the snow blade, fixed by 12 round
head square neck bolts M6x15mm, washers and nuts. Assemble the
steering board to the snow blade, fixed by 4 bolts M6x15mm,
washers and nuts.
2
Assemble the main support to the steering board, fixed by a bolt
M8x50mm, washer and nut. There are 5 adjustment angles, fixed by
a D-sytle pin.
06
Snow Blade
Cleaning Lip
Round Head Square Neck
Bolt M6x15mm
Steering Board
Bolt M6x15mm
Bolt M8x50mm
D-sytle Pin
Main Support
3
Assemble the bottom
handle to the main
support, fixed by a bolt
M6x45mm, washer and
nut. There are 5
adjustment angles,
fixed by a D-sytle pin.
4
Connect the upper
handle to the bottom
handle, fixed by a bolt
M6x45mm, a bolt
M6x30mm, washers
and nuts.
5
Assemble the wheels to
the main support, fixed
by large washers and
cotter pins.
Bottom Handle
Bolt M6x45mm
Upper Handle
Bolt M6x45mm
Bolt M6x30mm
Wheel
Large Washer/Cotter Pin
07
Publicité
