GROLAB SOILBOT Manuel D'installation page 11

COMMUNICATIONS
Connec on to GroNode C
Make sure the GroNode is correctly installed Make sure the GroNode is correctly installed
and accessible through the GroLab So ware, if and accessible through the GroLab So ware, if
not follow the instruc ons provided inside the not follow the instruc ons provided inside the
G GroNode's manual.
A er installing the SoilBot, open the GroLab A er installing the SoilBot, open the GroLab
S So ware, establish a connec on with GroNo-
d de and then, access Modules through the
m main menu.
Usually, 2 or 3 minutes are enough for GroNo- U
de to detect a newly installed module, a er de to detect a newly installed module, a er
being detected it automa cally appears in the being detected it automa cally appears in the
M Modules menu under the respec ve module
t type sec on.
You can check the list of modules of the same You can check the list of modules of the same
type on the right side of this menu. Note that type on the right side of this menu. Note that
o one GroNode supports a maximum of 4 modu-
les of each type. les of each type.
2
EN
ES
FR
-
e
-
e
-
10