SW-Motech HDG.00.220.31700/B Instructions De Montage page 13

1
 WARNING: Since the handguard mounting kit is installed in a safety-
relevant area of ​ ​ t he vehicle, SW-MOTECH recommends having the
installation/maintenance of the product carried out by a qualified specialist
workshop.
 WARNING: Always wear eye and hand protection!
 WARNING: Always use the proper tools!
 NOTE: Installation is shown on the left side. Repeat the installation with the
corresponding parts on the right side of the handlebar.
 NOTE: The handlebar shown serves as an example.
 NOTE: The connecting plate (3/4) shown in the drawing serves as an example.
The correct representation and orientation of the connecting plate are shown in
the detailed drawing on the right.
Place the clamps (1/2) around the handlebars at the locations shown in the
detailed drawing above.
LOOSELY screw the connecting plates (3/4) to the clamps (1/2). The clamps
(1/2) must be able to be moved for positioning.
 WARNING: Use a liquid threadlocker!
Tighten the screws (5) hand-tight.
The content translation is automated.
© SW-MOTECH GmbH & Co. KG
MOUNTING STEP · READ AND KEEP MOUNTING INSTRUCTIONS!
4
1
1
×
1
2
×
1
3
×
1
4
×
2
5
×
M 8 Nm
Errors and omissions excepted
Subject to technical and design changes.