Cleaning Method - Mediclinics SC0085H Manuel D'installation Et D'utilisation

www.mediclinics.com
Models with tube:
 Unhook the hose from its holder.
 Press the start button.
 Aim the airflow towards hair and begin drying.
 The hair dryer works during 90 seconds. After
that it stops and will be ready to work again.
Push button
PREVENTIVE MAINTENANCE AND CLEANING
Correct cleaning of the machine will lengthen its working life.
When in use, the machine will accumulate dust inside, which should be cleaned
out at least once a year.

CLEANING METHOD

1- Disconnect the dryer current supply.
2- Unscrew the lock screws using the special wrench.
3- Remove cover (See "Dismantling for Installation").
4- With a soft bristle brush, remove the accumulated dust in the scroll fan,
rotating it by hand.
5- With the same brush, clean accumulated dust from the rest of the
components.
6- Clean the air inlet grill with a medium brush. Check the condition of the motor
brushes. These should be replaced when their length is below 5 mm.
7- Once the maintenance process is complete, reassemble the cover, screw
down the lock screws and connect to the power.
8- Start up the machine and leave it running, until no further remains of dust
come out through the nozzle.
CLEANING OF CHROMED AND GOLD-PLATED COVERS
For cleaning purposes only a damp cloth is to be used. Do not use any kind of
detergents, acids, lye, abrasives, hydrochloric acid, etc.
Take care not to damage or force any component.
-11-