MARKINGS:
/
Manufacturers Trademark
See instructions for use. If the instructions for use
recommendations are not adhered to, the protection afforded
by the device may be severely impaired.
Indicates that product manufacture meets international
performance and quality management standards.
Some components can be recycled.
Date of manufacture.
EN 12941:----
The European standard for powered filtering respiratory devices and its year of publication.
A#:----
Amendment to EN 12941 and its year of publication.
TH3
Indicates a 99.8% efficiency with an APF 40.
P R SL
A reusable solid and liquid particulate aerosol filter.
EN 397:----
The European standard number for industrial safety helmets and its year of publication.
EN 50365:----
The European standard number for electrically insulating helmets for use on low voltage installations and its year of publication.
This helmet is electrically insulated for use working live or close to live parts on installations not exceeding 1000 V a.c.
or 1500 V d.c.
53-64 cm
The size range of the helmet, head circumference.
-20 °C / -30 °C /
The helmet will provide some protection when worn in an environment at or above these temperatures.
-40 °C
440 V a.c.
The helmet will protect the user against short term, accidental contact with live electrical conductors up to a voltage of 440 V a.c.
MM
The helmet will provide some protection against molten metal splash.
LD
The helmet will provide some protection from lateral compressive loads.
ANSI/ISEA
The American Standard (ANSI) for Industrial Head Protection and its year of publication.
Z89.1-2014
EN 166:2001
The European Standard for Industrial Eye Protection.
2-1.2
Ultra violet filter (C = good colour recognition) & grade # (EN170).
1
Number signifying the optical class, 1 is high 3 is low.
B
Withstands medium energy impact from high speed particles.
T
If protection at extremes of temperature is required select eyewear including a T after the impact marking.
8
Protection against short circuit electric arc.
9
Protection against molten metals and hot solids.
K
EN166 resistance to surface damage by fine particles.
Use by date.
5
Regulation 2016/425 on personal
protective equipment, as amended to
apply in GB.
Conformity to Regulation (EU) 2016/425.
Dispose of in accordance with local legislation.
Storage temperature and humidity ranges.