WaterRower Nohrd Bike Notice De Montage page 37

Service / Parts: www.nohrd.com
Step 7
Fasten the curved saddle bar (G) to the bike's solid wood main
frame (A) using 4x cylinder screws M6x140 (P) and screw tight
with a 5mm allen key (T).
Step 8
Attach the saddle support tube (H) to the saddle (I) using the bolt.
Next, slide the assembled saddle support with saddle on to the curved
saddle bar (G) and set the seat at your preferred height.
The saddle can be adjusted back and forth with the knob to further
adapt to height and preferred training position.
Step 9
Slide the handle bar unit, featuring gas pressure spring (F) into the provided
shaft on the upper part of the bike's main frame and set to preferred height.
.
37