WaterRower Nohrd Bike Notice De Montage page 33

Service / Parts: www.nohrd.com
Step 4
Proceed with 2x gear unit retaining rings (L), as well as 8x flat-head screws
M6x25 (O) (4 screws / side). Using a 4mm allen key (U), first fasten the left
gear unit ring to the main frame with 4 flat-head screws M6x25 (O).
Please note:
Do not screw flat-head screws M6x25 (O) fully tight yet, just tighten.
Repeat directions on right side.
Please note:
Do not screw flat-head screws M6x25 (O) fully tight yet, just tighten.
33