Batteries
The thermometer incorporates visual low battery indication as follows:
'Battery OK': measurements
'Battery Low': batteries needs to be
are possible
replaced, measurements are possible
>
>
CAUTION: Since the thermometer is
splash proof, please make sure the battery
cover and rubber stopper are on tight.
>
1. Please pick out the rubber stopper on the battery cover by carefully using a small, pointed tool, such
as a screwdriver. Then remove the screw that is under the rubber stopper.
2. Remove the battery compartment cover.
3. Replace the 2 AAA 1.5V batteries.
4. Replace the battery compartment cover.
5. Replace the screw and the rubber stopper.
When the 'Low Battery' icon indicates the battery is low, or the readings grow dim or irregular, the
batteries should be replaced immediately. Please note: It is important to turn the instrument off before
replacing the batteries, otherwise the thermometer may malfunction. Dispose of used batteries properly
and keep away from children. Do not dispose of batteries in fire, as they may explode or leak.
Specification
Infrared Scan function
(IRT Mode)
Measurement Range
-67°F to 482°F/-55°C to 250°C
Operating Range
0 to 50°C (32 to122°F)
-67°F to 32°F +/- 1.8°F + (-0.18 x (reading – 32))
-55°C to 0°C +/- 1°C + (-0.1 x reading)
Accuracy
32°F to 149°F/0°C to 65°C +/-2°F(1°C)
149°F to 482°F/65°C to 250°C +/-1.5% of reading
Resolution (-9.9 to 199.9°C)
0.2°C/0.5°F
Dimension
22.18*38*190.09mm
Weight (with battery)
98.1g
Battery Life
Typically 40 hours, minimum 30 hours continuous use
Thermocouple –
After 4 minutes if no change in temperature
Auto Shut-Off
Infrared – After 15 seconds if no change in temperature
'Battery Exhausted':
measurements are not possible
>
>
Thermocouple Probe (K type, Grounded)
(COT Mode)
-67°F to 626°F/-55°C to 330°C
Below 14°F /-10°C +/-2°F(1°C)
14°F to 149°F/-10°C to 65°C +/-1°F(0.5°C)
Above 149°F/65°C +/-1% of reading
0.2°C/0.5°F
EMC/RFI
Readings may be affected if the unit is operated within a radio frequency electromagnetic field strength of
approximately 3 volts per meter, but the performance of the instrument will not be permanently affected.
Two Year Limited Warranty
This product is warranted against defects in materials or workmanship for two (2) years from date of
original purchase for the original purchaser. It does not cover damages or wear resulting from accident, misuse,
abuse, or unauthorized adjustment and/or repair. Should this product require service (or replacement at our
>
option) while under warranty, please pack the item carefully and return it prepaid, along with receipt showing date
of purchase and a note explaining reason for return to:
Taylor Precision Products
Las Cruces, New Mexico 88001, Suite A
Customer Service Phone: 1-800-225-4834
Customer Service Fax: 1-575-526-4347
There are no expressed warranties except as listed above. This warranty gives you specific legal rights, and you
may also have other rights which vary from state to state.
For additional product information, or warranty information in Canada or elsewhere outside the USA, please
contact us through www.taylorusa.com.
©2011 Taylor Precision Products and its affiliated companies, all rights reserved. Taylor® and Leading the Way in
Accuracy® are trademarks of Taylor Precision Products and its affiliated companies. All rights reserved.
Made to our exact specifications in China.
2220 Entrada Del Sol
www.taylorusa.com
NOT LEGAL FOR TRADE
9306N 4.11TT