Transportation, Storage And Disposal; Disposal Of The Product - Husqvarna T 4000 Petrol Manuel D'utilisation

Transportation of the product
• Make sure that the Longopac bag is empty before a
transportation
• Make sure that the Longopac bag is attached to the
product during transportation.
• Make sure the inlet plug is inserted into the main
tank and the hose is attached with both ends to the
pre separator (T 4000 Petrol Soff-Cut)
• Be very careful when you move the product up and
down ramps. The product is heavy and there is a risk
of injury if the product falls or moves too quickly. For
ramps with a large angle, always use a winch. Do
not walk or stay below the product.
• Tie down the product safely during transportation, by
using the tie down lugs, in order to prevent damage
and accidents.
• Engage the locking caster safely on the wheels.
• If possible, do the transportation of the product
during good weather conditions.
• If possible, use a closed vehicle during
transportation of the product.
• If the engine has been running, allow it to cool for at
least 15 minutes before loading the engine-powered
equipment onto the transport vehicle. A hot engine
and exhaust system can burn you and can ignite
some materials.
• During transportation, battery must be securely
fastened and completely disconnected at all times.
Storage of the product
• The product must be stored inside away from
outdoor elements.
• Do not expose the product to rain or moisture.
• Attach the locking casters safely.
• Store the product and the equipment in a dry area
with no frost or excessive heat.
• Store all equipment in an locked area, so that it is
out of reach of children and unauthorized persons.

Disposal of the product

• Obey the local recycling requirements and applicable
regulations.
• When the product no longer is used, send it to the
dealer or discard it at a recycling location.
14

Transportation, storage and disposal

1105 - 001 - 11.07.2019