Titanwolf 20180703SZ232 Mode D'emploi page 18

5.2.3 LED lighting
You can customise the LED lighting of the mouse accordingly. The effect can be
selected depending on the appearance as desired. You can select an effect in the
menu item "LED" and accordingly adjust the settings.
5.3 Creating macros
Macros are recordings of specific key sequences, which can be run by pressing a
single mouse button depending on the configuration. This can, for example, be
keystrokes or mouse commands. To define a macro, click the "Macro Manager"
button in the left section of the software.
To start recording a new macro, first click on "New macro". Then, define a name.
Select the desired macro. The recording can then be started using the "Start recor-
ding" button and stopped using the "Stop recording" button. Additional options
are available on the right side of the Macro Manager for recording the steps.
In this way, you can define whether the time between pressing the individual but-
tons and the stop times are measured and recorded, so that the recorded macro
is executed several times when the mouse button is pressed. You can customise
18
English