Publicité
Les langues disponibles
Les langues disponibles
HOLD :
Choose one of these two options to set the ALCOR's behavior when losing the W-DMX signal using the [
then validate using the [ENTER] key.
•
[ON] :
ALCOR keeps the last value in case of loss of the W-DMX signal
•
[OFF] : ALCOR goes into blackout mode when losing the W-DMX signal
RDM :
•
Not implemented
DISPLAY REVERSE
Choose one of these two options to reverse the direction of the display using the [
[ENTER] key.
•
[ON] : Inverted.
•
[OFF] : Normal.
BATTERY
Enter this submenu to define the battery management mode
key.
•
Choose
[STD]
to optimize operating time. (24h with one color - 7h with all colors)
•
Choose
[LIVE]
to optimize the lighting power. (12h with one color - 4h with all colors)
DIMMER CURVE
Enter this submenu to define the Dimmer curve using the [
•
[Linear] - The increase in light intensity is linear as the DMX value increases.
•
[Exp] - Light intensity control is finer at low levels and coarser at high levels
•
[Log] - Light intensity control is coarser at low levels and finer at high levels.
•
[S-Curve] - Light intensity control is finer at low and high levels and coarser at medium levels.
Linear Curve
BACKLIGHT :
•
Not implemented
SCREEN TIME
Enter this submenu to define the duration before the display turns off (between 10 seconds and 60
˄
˅
des touches [
] et [
CURRENT ADJ
•
Reserved for service.
TEMP
•
Reserved for service.
W-DMX SETTINGS
Exp Curve
] puis valider à l'aide de la touche
˄
] et [
˄
˅
using the [
] et [
] keys then validate using the [ENTER]
˄
˅
] et [
] keys then validate using the [ENTER] key.
Log Curve
[ENTER].
˄
˅
] et [
˅
] keys then validate using the
S Curve
seconds),à l'aide
] keys
Page 31
Publicité
