Unpacking And Assembly - Ardisam Benchmark 38249 Manuel De L'utilisateur

UNPACKING AND ASSEMBLY

CARTON CONTENTS
ASSEMBLY
• Manual Parts Bag
• Hardware Parts Bag:
• A - (4) M8 x 40 MM Bolts
• B - (4) M8 x 20 MM Bolts
• D - (2) 12 x 24 MM Washers
• E - (12) M8 Washers
• G - (8) M8 Nuts
• H - (3) M8 Nyloc Nuts
• I - (8) M6 Nuts (Installed on stud plates)
• Cone Cover
• Debris Bag
• (2) Wheels
• Hopper
• Bag Connector
• Bottle of 4-cycle Engine Oil
• Cone
• Chipper Assembly
• Handlebar
• Kickstand
• Hopper Guard
• Bag Support Rod
12 Get parts online at www.ardisam.com or Call 800-345-6007 M-F 8-5 CST
212cc CHIPPER SHREDDER / BROYEUSE/DÉCHIQUETEUSE 212 cm
KICKSTAND
Position the kickstand underneath the engine with the loop
of the kickstand pointing away from the wheel axle. Using
the four M8 x 40 MM bolts (A), eight M8 washers (E) and four
M8 nuts (G), secure the kickstand to the base plate of the
engine.
D
Slide the wheel so that the flange on the tire points outward
away from the unit, onto the axle and slide a 12 MM wash-
er (D) onto the axle against it. Insert the a cotter pin into
the hole in the end of the axle. Bend the cotter pin over to
secure the wheel to the axle. Repeat for opposite side.
Owner's Manual / Manuel de l'utilisateur
FIGURE 1
WHEEL AXLE
COTTER PIN
FIGURE 2
3
38249 (5131-002)
G
WHEEL AXLE
E
A