6.2 STORAGE
fi«
CAUTION
• Complete any operations required to store the machine that incorporates the pump as recommended
by its manufacturer.
WARNING
• Refer to the use and maintenance manual for the machine that incorporates the pump. After use,
complete a cleaning cycle, making the pump take up clean water. Never store the pump with
pumped liquid inside it.
• The pump is not frost proof.
In order to prevent the formation of ice inside the pump in cold areas, we recommend making the
pump take up a motor vehicle grade anti-freeze before starting the "storage" procedures (diluted
as instructed for the minimum temperature that the pump will be exposed to) and then drain it
completely, making it operate for a few minutes without taking up any liquid.
fi«
CAUTION
• dispose of anti-freeze liquid correctly; do not throw it away in the environment.
7. CLEANING AND MAINTENANCE
fi«
CAUTION
•
Only start cleaning and maintenance once the instructions in the 'Switching off' section
have been completed, i.e. no part of the pump must be in motion and no pipe must contain
liquid under pressure..
It is particularly important to always disconnect the electricity supply, if present.
31
103/106